High Speed Module Electronic Jacquard Loom For Jacquard Machine

Operating procedures:

1. During maintenance, the left and right red stop buttons must be pressed first, indicating that the machine is in the process of maintenance.

2. It is strictly forbidden to cross the barrier. Go up and down the stairs slowly and carefully. Be careful of sliding.

3. It is strictly prohibited to remove the cross bar of the corrugated plate crossing the bridge, hang it on the ground of the gantry arbitrarily and roll down, injuring the equipment and the car stopper.

4. The tools shall not be placed at will to prevent accidents caused by falling out of hand during operation.

5. When the safety baffle is moved due to maintenance needs, it shall be restored and returned in time after maintenance.

6. When the machine is started after maintenance, it shall be operated at a slow speed for more than 2 weft, and the fast train can be operated only after it is confirmed that the cloth quality is normal and the equipment operates normally.

Our service

• Provide technical design and solutions;
• Design and manufacture non-standard equipment;
• Carry out professional technical training and guidance according to the contract;
• Spare parts are available at any time;
• Remote technical consultation and service;
• Provide other special technical services according to customer requirements.

FAQ